Fanuc

Fanuc Robodrills are super high speed, high precision, small footprint machining centres.

  • RoboDrill DIA Series

    With about five thousand units installed in the US, the Fanuc RoboDrill has proven itself as possibly the most reliable machining center in the market today! The base design of the RoboDrill addresses the demanding reliability issues of all industries. This machine is built to perform for three shifts a day, seven days a week, year in and year out.

     

     

    RoboDrill Longbed LIA Series

    The FANUC RoboDrill Longbed is a vertical machining center capable of outperforming drilling and tapping machines and offering milling capability comparable to a 40 taper machine. It is the long bed model of the FANUC RoboDrill MIA5, and is for larger workpiece needs.

     

    • 5 / 7.5 / 16.5 HP @ 10,000 rpm
    • 2 / 5 / 7 HP 24,000 rpm
    • 700mm X & 400 Y
    • 21 Tool ATC
    • 330mm Z
    • 660 lb Table capacity

    Download Catalog

     

     

    RoboDrill Shortbed SIA5 Series

    The FANUC RoboDrill SIA5 is a vertical machining center capable of high speed, high precision and high efficiency operation. This model is known as the "space saver" with a short bed, but offers the same speed, proficiency, and precision found in the standard and long-bed models. It is a compact machining center for tight spaces.

     

     

     

     

    • 5 / 7 / 16.5 HP @10,000 rpm
    • 2 / 5 / 7 HP @24,000 rpm
    • 300mm X & Y
    • 21 Tool ATC
    • 330mm Z
    • 40” wide

    Download Catalog

     

     

    RoboDrill Standard MIA5 Series

    The Fanuc RoboDrill Standard is a high performance, compact machine center based around reliability and speed.  At 1.5G and 2,125 IPM, these compact machines make quick work out of any milling, drilling or tapping jobs.  Reliability has also been addressed with less than 4 moving parts in its toolchanger.  These features coupled with the latest Fanuc 31i-A5 control, make the RoboDrill the preferred machine in any shop for higher profits.

     

     

    • 5 / 7/ /16.5 HP @10,000 rpm
    • 2 / 5 / 7 HP @24,000 rpm
    • 500mm X & 400 Y
    • 21 Tool ATC
    • 330mm Z
    • 660 lb Table capacity

    Download Catalog


  • RoboDrill Med Cell

    The RoboDrill Med Cell has full 5-axis machining capability and is ideal for medical machining applications including short run production of parts in a variety of materials from stainless steel to titanium.

     

    RoboDrill Med Cell

    The RoboDrill Med Cell is a complete pre-engineered, fully-integrated production machining cell which automates loading and unloading of medical device parts. The reliable FANUC RoboDrill Machining Center is at the core of the system. With a fully integrated FANUC 6-axis robot, the Med Cell automates loading / unloading and minimizes or eliminates a long list of production problems.  The high-speed 6-axis FANUC LR Mate 200iC Robot comes complete with grippers, a teaching pendant, and several easily customizable programs. The package also includes fully-interfaced inbound and outbound conveyors and guarding that are customized to receive the integrated macro chuck, for full lights-out automation.  The Med Cell also incorporates a compact, custom engineered drop trunnion rotary table that positions the table faceplate close to the RoboDrill table surface, providing increased rigidity and enhanced accuracy.
    Download Brochure


  • RoboDrill Pallet Changer PC2

    The fast and capable RoboDrill machine center coupled with a pallet changer for JIT setups, makes this model the ultimate job shop production center.  The pallet changer allows the machine spindle to keep working while additional setups or unloading operations are going on.

     

    RoboDrill Pallet Changer PC2

    The RoboDrill Pallet changer can be adapted from low production runs and JIT production, to high volume production quickly.  The pallet changer moves the pallet in and out of the machine in just 6 seconds.  Moving 4th axis and hydraulics is simple and easy as well.  

    Download Robodrill PC2 Brochure


  • Fanuc DDR Linear Motor 4th Axis

    Fanuc has developed their own brand of 4th axis, with linear motors.  These systems offer no backlash, with no worm gear drive.  Running at 100 RPM, the DDR system is fast and accurate, as well as being less expensive than traditional worm drive 4th axis systems.

     

    Fanuc DDR Linear Motor 4th Axis

    The DDR's high-speed 4th axis dramatically reduces part cycle times by eliminating the positioning delays of traditional rotary tables and enabling the RoboDrill to machine at the high speeds of its other 3 axes. Its gear-free, zero-backlash linear motors are capable of unclamping, rotating 180°, and reclamping in approximately 0.4 seconds at a table-rotation speed of 150 rpm. Indexing precision is ± 0.0055 degrees (±20 seconds). The DDR's clamping force — up to 220 ft-lbs — is unusual for its size. The 140-mm unit has a maximum torque of 192 ft-lbs and a maximum loading capacity of 220 pounds. A large 40-mm through-hole allows for pneumatic or hydraulic fixture actuation.
    Download Technical Specs


  • RoboDrill Jobshop Cell

    Coupling the versatility of the Fanuc RoboDrill machine center with a Fanuc 200iC robot to deliver a package to compete with international manufacturing.

     

    JobShop Cell

    Coupling the versatility of the Fanuc RoboDrill machine center with a standard automation package, the JobShop cell allows North American companies to compete with low cost off shore countries.  Utilizing the Fanuc 200iC robot, the Jobshop cell is easy to change over from job to job, and then run unattended production.  Both units are seamlessly integrated by Methods to give our customers a stand alone automation solution that is reliable and affordable.



    Download Technical Specs


  • RoboDrill Trodemaster Electrode Machining Center

    The Trodemaster high speed mill offers a compact, low cost footprint capable of machining graphite or copper electrodes.  With 24,000 RPM spindle speed this compact machine can accurately produce complex exectrodes for EDM operations.  These machines make the perfect companion to a Methods Exeron Die Sinker EDM machine.

     

    RoboDrill Trodemaster High Speed Mill

    The Trodemaster high speed mill offers a compact, low cost footprint capable of machining graphite or copper electrodes.  With 24,000 RPM spindle speed this compact machine can accurately produce complex electrodes for EDM operations.  These machines make the perfect companion to a Methods Exeron Die Sinker EDM machine.

     




    Download Trodemaster Brochure


  • RoboDrill D14 MIA5 ECO

    The RoboDrill D14 MIA5 ECO is a feature rich, fully capable vertical machine center.  This machine has the milling power and speed to tackle jobs that you need to be more competitive.

     

    RoboDrill T14iFa ECO2

    The Fanuc RoboDrill T14iFa ECO2 is a high performance, compact machine center focused on reliability and speed.  At over 1.5G and 2,125 IPM, these compact machines make quick work of any milling, drilling or tapping jobs.  Reliability has also been addressed with less than 4 moving parts in its toolchanger.  These features coupled with the latest Fanuc 31i control, make the RoboDrill the preferred machine in any shop for higher profits.

     

     

     

    • 14.75 HP 10,000 Rpm
    • 500mm X & 400 Y
    • 14 Tool ATC
    • 330mm Z
    • 660 lb Table capacity
    • 1.6 chip to chip ATC
    • Autolube
    • Basic top cover
    • Worklight
    • High Speed machining functions

    Download Robodrill ECO Brochure